August 19, 2020
Rhino 2.0 Axle uninstalled

What Customers Are Saying About Rhino 2.0 Axles

Speculating whether you should buy Rhino 2.0 Axles? Don't just take our word for it. Take a look at what real customers have to say—the good and the bad.
July 9, 2020
Honda Talon Rhino 2.0 Axle Installation

How to Install Rhino 2.0 Axles on a Honda Talon 1000R

Whether you're upgrading or replacing, those Rhino 2.0 Axles don't do your Honda Talon any good sitting in the box. Braden will show you how to install them.
February 27, 2020

How to Install Rhino 2.0 Axles on a Can-Am Maverick X3

Follow along as Braden shows you the correct way to get an axle seated into the differential of this Can-Am Maverick X3. A proper install can save you tons of hassle down the road!
February 9, 2018

The King of the Hammers 2018—Mitch Guthrie Jr. Wins It with Rhino 2.0 Axles

The King of the Hammers is the ultimate UTV race—if you’re a UTV enthusiast, you won’t miss it. It’s 134 miles split into two laps of open desert, tricky rock shelves, and boulder-filled canyons in southern California’s Johnson Valley. It’s an eight-hour endurance race that tests not only the ability of the driver, but also the durability of their machine. […]
July 7, 2017

Rhino Axles—We’ve Got an Axle for Any Rider

SuperATV's Rhino line has an axle for every type of rider. From the original Rhino Brand Axles to the top-of-the-line X300 Axles, they're made with top strength and high quality.
March 17, 2017

How to Install Rhino 2.0 Axles on a Polaris RZR

Sooner or later, you'll need a new axle on your Polaris RZR. Not sure how to install it? Tyler Greves is here to walk you through it.
February 14, 2017
Rhino 2.0 Axles

SuperATV’s Rhino 2.0 Axles: How We Make Them

In this video, Kyle Kempker tells all about SuperATV's goals in designing Rhino Axles and how we made the best heavy-duty axle on the market.
July 24, 2015
A Rhino 2.0 Axle installed on a side-by-side

How to Tell if Your UTV Axles Are in a Bind

Adding a lift kit or offset A-arms can have negative repercussions if you're not careful. In this video, Tyler Greves shows you how to tell if your axles are in a bind.